Search
Filters
Close
Rear steel bumper for 2014-2021Toyota Tundra
Manufacturer: DEMELLO OFF-ROAD

Texture finish powder coating tuxedo black.

Fully sand blasted and powder coated and 

baked on. Powder coating is a good thick coat

alternative to spray paint that gets into all the small 

places paint can not.  

Powder coating offers no warranty against 

scratching, chipping, fadding, rust, alien attacks 

or Chuck Norris. 

Specifications (Per Light):

Lumens: 1,130 Utilizing 2 LEDs
Wattage/Amps: 12W / .9A
Dimensions: 2.93" x 1.76" x 1.68"
Weight: 8 ounces
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Hard Anodized & Powder Coated Cast Aluminum
Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless Steel
Exceeds MIL-STD810G (Mil-Spec Testing)
Built-In Overvoltage Protection
IP69K (Waterproof up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing

Flat rates for shipping to the lower 48

Please contact us if you have any quesitons.

About Shipment Insurance through UPS Capital Insurance Agency

  • Insure most shipments valued up to $100,000 without prior approval
  • $0 deductible for many commodities. To see a list of commodities with deductibles or other restrictions, see the UPS Capital Insurance Customer Reference Guide
  • Expedited insurance claims for shipments value up to $5000
  • Covered losses are valued at the amount of invoice value, and the cost of freight. Plus, for new goods, up to 10% of the insured value
  • In the event a shipment contains multiple commodities, the highest deductible and insuring conditions of the shipped commodities will apply
  • For more information about UPS Capital shipment insurance see the UPS Capital Insurance Customer Reference Guide

Differences Between Carrier Liability and Shipment Insurance

Carrier Liability

A regulated Motor Carrier operating in interstate commerce (most interstate trucking companies) is liable to Shipper (their customers) for loss, damage or delay under a federal law called the Carmack Amendment to the Interstate Commerce Act. Since 1935, the Carmack Amendment has provided a uniform, national standard to limit the liability of Motor Carriers for loss, damage or delay to freight shipments. However, the Carmack Amendment does not impose liability on Motor Carriers for shipments for a wide variety of reasons. For example, if the Shipper waives liability in the bill of lading above a specified value, the claim is limited to the declared value. Another example is that a Motor Carrier is not liable for intrastate shipments. In addition, to obtain payment for a claim under the Carmack Amendment, a Shipper must prove numerous facts, including the following: (1) delivery of freight to the Motor Carrier in good condition; (2) delivery to the person named in the bill of lading for freight that is short, damaged or unreasonably late; and (3) the amount of actual loss or injury to the freight. Under the Carmack Amendment, there are multiple other reasons that the Motor Carrier does not have to pay claims by Shippers, including proof by the Motor Carrier that it was not negligent or that the loss was due solely to an act of the Shipper.

Shipment Insurance

Shipment insurance pays for loss, damage or delay different from the coverage provided by the Carmack Amendment. For example, a claim by a Shipper for freight loss, damage or delay may be covered by shipment insurance, regardless of whether the shipment was intrastate. Similarly, shipment insurance may cover loss, damage or delay without regard to whether the Motor Carrier was negligent or the claim was due to the negligence of the Shipper. The only way to know whether particular freight loss, damage and delay are covered by shipment insurance is to read the policy.

Bumper installation availiable at our store

12785 Magnolia Ave. Unit 1

Riverside, CA 92503

Includes removing and/or trimming your factory bumper and installing your new DeMello off-road bumper!

Does NOT include wiring for lights and/or winches. (Can be done at additional cost)

$1,450.00

DeMello Off-Road Tundra Rear bumper 2014-2019. This bumper is constructed from a 1/2in dual frame mounts on both sides of the bumper that make up the shackle points. a 3/16in thick skin and 3/16in structure help make this bumper stout and sexy. 

This bumper is built to bolt onto your 2014-2019 Toyota Tundra front end once your remove your factory bumper and plasti. While retaining your factory hitch reciever..

This bumper comes bare-metal and powder coating is an option.

Weight is approximately 120lbs empty

Lead times : 18-22 weeks

shown with LED lights in bumper and on bumper not included.

 

TECH INFO:

  • Complete bolt on application with minum modifications to your factory body parts
  • weight 120lbs approximate
  • re-enforced mounting point brackets
  • Fits 3-4in lights we recommend Baja Design lights
  • Texture finish powder coating offered.
  • Does not work with blind spot monitoring

Please note:

  • Powder coating is an option and holds no warranty from defects and damages. It will not protect the bumper from scratches, rust, trail damage, street damage or other. We do our best to ship the product to you with out damage to the powder coating but it has no written or other warranty.
  • Please contact us for accurate lead times (20% restocking fee if order canceled)

DeMello Off-Road Tundra Rear bumper 2014-2019. This bumper is constructed from a 1/2in dual frame mounts on both sides of the bumper that make up the shackle points. a 3/16in thick skin and 3/16in structure help make this bumper stout and sexy. 

This bumper is built to bolt onto your 2014-2019 Toyota Tundra front end once your remove your factory bumper and plasti. While retaining your factory hitch reciever..

This bumper comes bare-metal and powder coating is an option.

Weight is approximately 120lbs empty

Lead times : 18-22 weeks

shown with LED lights in bumper and on bumper not included.

 

TECH INFO:

  • Complete bolt on application with minum modifications to your factory body parts
  • weight 120lbs approximate
  • re-enforced mounting point brackets
  • Fits 3-4in lights we recommend Baja Design lights
  • Texture finish powder coating offered.
  • Does not work with blind spot monitoring

Please note:

  • Powder coating is an option and holds no warranty from defects and damages. It will not protect the bumper from scratches, rust, trail damage, street damage or other. We do our best to ship the product to you with out damage to the powder coating but it has no written or other warranty.
  • Please contact us for accurate lead times (20% restocking fee if order canceled)
Customers who bought this item also bought